Ram 1500/2500/3500: Four-Wheel Drive Operation - If Equipped
Ram Truck 1500 2500 3500 (2009 - 2018) Owner's Manual / Starting And Operating / Four-Wheel Drive Operation - If Equipped
- Manually Shifted Transfer Case - If Equipped
- Electronically Shifted Transfer Case (Four-Position Switch) - If Equipped
- Electronically Shifted Transfer Case (Five-Position Switch) (1) - If Equipped
- Electronically Shifted Transfer Case (Five-Position Switch) (2) - If Equipped
READ NEXT:
Manually Shifted Transfer Case - If Equipped
The transfer case provides four mode positions.
Two-wheel drive high range (2H)
Four-wheel drive high range (4H)
Neutral (N)
Four-wheel drive low range (4L)
This transfer case is intended to be
Electronically Shifted Transfer Case (Four-Position
Switch) - If Equipped
This is an electronic shift transfer case and is operated by
the 4WD Control Switch (Transfer Case Switch), which is
located on the instrument panel.
Transfer Case Switch (Four-Position)
This electro
Electronically Shifted Transfer Case (Five-Position
Switch) (1) - If Equipped
This is an electronic shift transfer case and is operated by
the 4WD Control Switch (Transfer Case Switch), which is
located on the instrument panel.
Transfer Case Switch (Five-Position)
This electro
SEE MORE:
ParkSense Sensors
The four ParkSense sensors, located in the rear fascia/
bumper, monitor the area behind the vehicle that is
within the sensors' field of view. The sensors can detect
obstacles from approximately 12 in (30 cm) up to 59 in (150 cm) from the rear
fascia/bumper in the horizontal
direction, depending on
Memory Position Recall
NOTE: The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the vehicle is not
in PARK, a message will be displayed in the Electronic
Vehicle Information Center (EVIC).
Driver One Memory Position Recall
To recall the memory settings for driver one using the
memory
© 2020-2024 Copyright www.ram-manuals.com
