Ram 1500/2500/3500: Illuminated Vanity Mirror - If Equipped
Illuminated vanity mirrors are located on each sun visor.
To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights will turn on automatically.
Closing the mirror cover turns off the light.
.png)
Illuminated Vanity Mirror
"Slide-On-Rod" Features Of Sun Visor - If Equipped
The sun visor "Slide-On-Rod" feature allows for additional flexibility in positioning the visor to block out the sun.
To use the "Slide-On-Rod" feature, rotate the sun visor downward and unclip it. Pull the sun visor along the "Slide-On-Rod" until the sun visor is in the desired position.
.png)
"Slide-On-Rod" Extender
Trailer Towing Mirrors - If Equipped
These mirrors are designed with an adjustable mirror head to provide a greater vision range when towing extra-wide loads. To change position inboard or outboard, the mirror head should be rotated (flipped in or out).
.png)
Trailer Towing Position
NOTE: Fold the trailer towing mirrors rearward prior to entering an automated car wash.
A small blindspot mirror is located next to main mirror and can be adjusted separately.
.png)
Blindspot Mirror
READ NEXT:
Seats
Seats are a part of the Occupant Restraint System of the
vehicle.
WARNING!
It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In a collision, people riding in
these areas are
Driver's Power Seat - If Equipped
Some models may be equipped with an eight-way power
driver's seat. The power seat switches are located on the outboard side of the
driver's seat cushion. There are two
power seat switches that are us
Passenger's Power Seat - If Equipped
Some models are equipped with a six-way power passenger
seat. The power seat switch is located on the
outboard side of the seat. The switch is used to control
the movement of the seat and seat cushion
SEE MORE:
Lap/Shoulder Belt Operating Instructions
1. Enter the vehicle and close the door. Sit back and
adjust the seat.
2. The seat belt latch plate is above the back of the front
seat, next to your arm in the rear seat. Grasp the latch
plate and pull out the belt. Slide the latch plate up the
webbing as far as necessary to allow the belt to go
a
Easy-Off Tailgate
To simplify mounting of a camper unit with an overhang,
the tailgate can be removed.
NOTE: If your vehicle is equipped with a rear camera or
RKE the electrical connector must be disconnected prior
to removing the tailgate.
Disconnecting The Rear Camera Or Remote Keyless
Entry - If Equipped
1. Open t
