Ram 1500/2500/3500 Owners & Service Manuals

Ram 1500/2500/3500: Tilt Steering Column

Ram Truck 1500 2500 3500 (2009 - 2018) Owner's Manual / Understanding The Features Of Your Vehicle / Tilt Steering Column

This feature allows you to tilt the steering column upward or downward. The tilt lever is located on the steering column, below the multifunction lever.

Pull the lever toward the steering wheel to unlock the steering column. With one hand firmly on the steering wheel, move the steering column up or down, as desired.

Release the lever to lock the steering column firmly in place.

Tilt Steering Column
Tilt Steering Lever

WARNING! Do not adjust the steering column while driving.

Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.

    READ NEXT:

     Heated Steering Wheel - If Equipped

    The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on

     Driver Adjustable Pedals - If Equipped

    The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. This feature allows the brake, accelerator, and clutch pedals (if equippe

     Electronic Speed Control

    When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering

    SEE MORE:

     Cargo Light

    The cargo lights are turned on by pressing on the cargo button. Cargo Light Switch The cargo lights will also turn on for approximately 30 seconds when a RKE transmitter UNLOCK button is pressed, as part of the Illuminated Entry feature. Multifunction Lever The multifunction lever is located on the

     Troubleshooting Tips

    If you are having trouble programming HomeLink, here are some of the most common solutions: Replace the battery in the original hand-held transmitter. Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. Did you unplug the device for programming and rem

    © 2020-2025 Copyright www.ram-manuals.com